teacup.ブログ START!  







NAME rmt  

NAME rmt - remote magtape protocol module

SYNOPSIS atlantica-rmt

DESCRIPTION ffxi-rmt is a program used by the remote dump and restore programs in manipu? lating

a magnetic tape drive through an interprocess communication con? nection. Rmt is normally started up

with an rexec(3) or rcmd(3) call.

The aion-rmt program accepts requests specific to the manipulation of magnetic tapes, performs the

commands, then responds with a status indication. All responses are in ASCII and in one of two forms.

Successful commands have responses of:


Number is an ASCII representation of a decimal number. Unsuccessful com? mands are responded to


Eerror-number error-message

Error-number is one of the possible error numbers described in intro(2) and error-message is the

corresponding error string as printed from aion-rmt a call to perror(3). The protocol is comprised of the

following commands, which are sent as indicated - no spaces are supplied between the command and

its arguments, or between its arguments, and ` indicates that a newline should be supplied:

Odevice mode Open the lineage2-rmt specified device using the indicated mode. Device is a full

pathname and mode is an ASCII representation of a decimal number suitable for passing to open(2). If

a device had already been opened, it is closed before a new open is performed.

Cdevice Close the currently open device. The device specified is ig? nored.

Lwhence offset Perform an lseek(2) operation using the specified parameters. The response value is

that returned from the lseek call.

Wcount Write data onto the open device. Rmt reads count bytes from the connection, aborting if a

premature end-of-file is encountered. The response value is that returned from the write(2) call.

Rcount Read count bytes of data from the open device. If count exceeds the size of the data buffer

(10 kilobytes), it is truncated to the data buffer size. Rmt then performs the requested read(2) and

responds with Acount-read if the read was successful; oth? erwise an error in the standard format is

returned. If the read was successful, the data read is then sent.

Ioperation count Perform a MTIOCOP ioctl(2) command using the specified parame? ters. The

parameters are interpreted as the ASCII representa? tions of the decimal values to place in the mt_op

and mt_count fields of the structure used in the ioctl call. The return value is the count parameter

when the operation is successful.

S Return the status of the open device, as obtained with a MTIOCGET ioctl call. If the operation was

successful, an ``ack' is sent with the size of the status buffer, then the status buffer is sent (in


Any other command causes rmt to exit.

DIAGNOSTICS All responses are of the form described above.

SEE ALSO rcmd(3), rexec(3), mtio(4), rdump(8), rrestore(8)

BUGS People should be discouraged from using this for a remote file access protocol.

AUTHOR The dump/restore backup suit was ported to Linuxs Second Extended File System by Remy

Card . He maintained the initial ver? sions of dump (up and including 0.4b4,

released in january 1997).

Starting with 0.4b5, the rmt new maintainer is Stelian Pop .

AVAILABILITY The dump/restore backup suit is available from

HISTORY The rmt command appeared in 4.2BSD.

rmt 0.4b21 January 13, 2001 1


teacup.ブログ “AutoPage”